DOT 3 BRAKE FLUID is recommended for re-Filler top-up of brake and clutch systems in passenger cars, 4WD's, motorcycles, light and Heavy Duty commercial vehicles, mining, construction and agricultural equipment that require a non petroleum based DOT 3 brake & clutch Hydraulic fluid.
DOT 3 BRAKE FLUID is suitable for use where the vehicle manufacturer specifies DOT 3 brake fluid.
DOT 3 BRAKE FLUID can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Guard Brake Fluid DOT 3 prior to first fill or before refilling the system.
DOT 3 BRAKE FLUID should be changed according to the manufacturers service Specifications.
PLEASE NOTE
Do not mix this product with SILICONE DOT 5 or MINERAL type brake fluids.
Not mixable with Silicone type assembly compounds
Avoid contact with skin, varnish & paint. If skin contact occurs wash with water.
CAUTION
Brake Fluids are naturally hygroscopic and will absorb water from the air. This will lower the effectiveness of the product.
